Course Outlines

Site Operation and Administration

  • Access Operator

    Online, Classroom

    This training course provides systems operators with a simple and guided overview of the Command Centre software providing the skills and confidence to monitor a Gallagher access control site.

    Course Outline Online   Course Outline Classroom

  • Access Administrator

    Online, Classroom

    This course provides an understanding of how to configure administrative tasks within Command Centre that may be required by a system administrator.

    Course Outline Online   Course Outline Classroom

  • Access Advanced Administrator

    Online, Classroom

    This is our most advanced Site Operation and Administration course, covering more complex configuration and administration tasks within Command Centre and providing system administrators with a deep understanding of our Command Centre platform.

    Course Outline Online   Course Outline Classroom

  • Mobile Everything

    Classroom

    This training courses provides system Operators and Administrators a view of Gallagher Security’s advanced mobile solutions.

    Course Outline Classroom

  • Workforce Management

    Classroom

    This training module builds on the scenario and system established within the Gallagher Access Advanced Administrator course to provide administrators an advanced view of Command Centre functionality and the confidence to effectively maintain and enhance an existing security system.

    Course Outline Classroom

Access Certification

  • Access Hardware Installer

    Online

    The Hardware Installer certification provides the fundamentals required to physically install Gallagher hardware and configure Controllers, HBUS devices, and I/O within Command Centre software. This training course is recommended for technicians who will mostly be working with installing physical hardware.

    Please note - Hardware Installer is a stripped-down version of Access Technician. All material covered in Hardware Installer is also included in Access Technician, there is no need to complete Hardware Installer if you intend to progress to Access Technician.

    Course Outline Online

  • Access Technician

    Online, Classroom

    This training course gives technicians the skills and confidence to configure and support a Gallagher system. Once completed, technicians will be certified to install, configure, and maintain a Gallagher Command Centre access control system.

    Please note - Access Technician includes all the materials covered in Hardware Installer, there is no need to complete Hardware Installer if you intend to progress to Access Technician.

    Course Outline Online   Course Outline Classroom

  • Access Engineer

    Online, Classroom

    Gallagher Access Engineer Certification provides the next level of certification, introducing advanced understanding of Command Centre functionality. This training course is designed to empower technicians working with more complex sites with the necessary skills to configure and implement advanced technology, providing easy site management and improved productivity.

    Course Outline Online   Course Outline Classroom

  • Access Integrator

    Classroom

    Gallagher Access Integrator Certification expands Gallagher Access Engineers’ knowledge, introducing Gallagher’s integration processes and providing the skills and expertise required to install a fully integrated Gallagher system, including middleware and APIs.

    Course Outline Classroom

  • Access Technician – Access and Alarms

    Classroom

    This training course introduces hardware installers to Gallagher Command Centre and provides the skills to configure and support a Gallagher system. Once achieved, attendees attain Access Technician Certification and can install Gallagher hardware and software.

    Course Outline Classroom

  • Access Visitor Management

    Classroom

    Visitor management is a feature of Command Centre that allows sites to manage permanent (visiting staff) and non-permanent (external) visitors. This course outlines the technical steps required to fully configure the Visitor Management functionality within a Command Centre system.

    Course Outline Classroom

  • Access Visitor Management Kiosk

    Classroom

    The Visitor Management Kiosk allows site visitors to register their details from a self-service touch screen kiosk and to automatically notify the host of the visitor's arrival without intervention by a reception. Several host and admin actions are also possible, these allow privileged users to manage various visit and visitor properties directly from the kiosk.

    Course Outline Classroom

Perimeter Certification

  • Perimeter Fence Installer

    Classroom

    This training course introduces Gallagher’s perimeter security solution and provides installers with the understanding and skills to design, install, configure, and commission Gallagher perimeter security solutions and products that meet the Gallagher perimeter code of practice.

    Course Outline Classroom

  • Perimeter Fence Maintenance

    Classroom

    Gallagher’s Perimeter Fence Maintenance training course covers the procedures necessary to maintain Gallagher Monitored Pulse Fences, Z10 Taut Wire Sensors and Z20 Disturbance Sensors.

    Course Outline Classroom

  • Perimeter Network for Fence Installer

    Classroom

    This training course introduces fence installers to the Gallagher Command Centre system structure and configuration and provides the skills and knowledge required to integrate Gallagher perimeter solutions with Gallagher Command Centre.

    Course Outline Classroom

  • Perimeter Network for Access Technician

    Classroom

    This training course further expands the Gallagher Access Technician, Engineer, or Integrator skill set. This course introduces perimeter system architecture and hardware and explains how to configure network perimeter products within Command Centre. Once completed, attendees are certified to integrate Gallagher perimeter solutions with Gallagher Command Centre.

    Course Outline Classroom

  • Perimeter Z20 Disturbance Sensor

    Classroom

    This training course introduces Z20 disturbance sensors, their installation and configuration. The program will give attendees the confidence to plan the layout of a site considering all environmental conditions. They will demonstrate the skills needed to successfully install and configure a Z20 sensor network using Command Centre and a 6000 Controller.

    Course Outline Classroom

  • DTL - Detection Technology Systems

    Online

    Welcome to the VibraSector Microphonic System - Online Training Course. Gallagher provides a wide range of perimeter products that allow customers to detect and deter intruders from unauthorized access to a site. Gallagher currently distributes two products from DTL, VibraSector, and MikroTek. This course will focus specifically on the VibraSector microphonic system.

    Course Outline Online

High Security Certification

  • High Security Class 5

    Classroom

    This training module provides Gallagher Access Technicians an introduction to the Gallagher Class 5 Security system. The training concentrates on the requirements of the Class 5 standard. The course explores the Gallagher Class 5 Hardware and Gallagher Command Centre configuration required to meet the standard.

    Course Outline Classroom

  • High Security Federal Access Technician

    Classroom

    The Federal Access Technician course is based on the standard Access Technician course but incorporates specific US Federal (PIV) requirements and configuration.

    Course Outline Classroom

  • High Security Type 1A Hardware

    Classroom

    Gallagher Type1A Hardware Certification provides an in-depth introduction to the Gallagher Type1A Hardware. The primary focus of training is to familiarise technicians with requirements of installation including hardware and software. Other necessary system information including backups, reports and fault finding are incorporated.

    Course Outline Classroom

  • High Security Type 1A CSS Engineer

    Classroom

    Gallagher Type1A CSS Engineer Certification provides an in-depth introduction to the Gallagher Type1A CSS. The primary focus of training is to familiarise technicians with requirements of installation including hardware and software. Other necessary system information including Administration tasks, backups and reports are incorporated.

    Course Outline Classroom

  • High Security Type 1A Standard User

    Online

    This course will provide the attendee with knowledge to complete all tasks outlined within 3E3676 User Guide, Gallagher Type 1A User Interface for Standard Users. This includes but is not limited to: Introduction to the Gallagher User Interface, Arming and Disarming, Acknowledging, and resetting alarms.

    Course Outline Online

  • High Security Type 1A Privileged User

    Online

    This course will provide the attendee with knowledge to complete all tasks outlined within 3E3675 User Guide, Gallagher Type 1A User Interface for Privileged Users. This includes but is not limited to: Introduction to the Gallagher User Interface, Arming and Disarming, Acknowledging, and resetting alarms, User Administration, & Reports.

    Course Outline Online

  • High Security PIV Solution

    Online

    Gallagher PIV Certification course provides an introduction to the Gallagher PIV Command Centre solution. The primary focus of training is PIV software licensing, configuration and registration of Federal high assurance credentials.

    Course Outline Online

Small and Medium Business (SMB)

  • SMB Partner

    Online

    This course equips Gallagher SMB Partners with the knowledge and skills to install, configure, and commission the Gallagher SMB cloud-based security system. The course also covers the Gallagher SMB App and how it can be used to manage site security.

    Course Outline Online

Recertification

Gallagher certification is valid for two years and is the technician’s responsibility to maintain. Recertification can be done online and is available for Hardware Installer, Access Technician, Access Engineer, and Access Integrator. Perimeter recertification is only available through classroom training. Recertification is a skill maintenance and validation program and is not a refresher or training course. Recertification aims to validate the technician is competent within the level of their certification.

Course Outline

Our team on the ground

Need a hand? Let us put you in contact with one of our local business development managers.

Stay up to date with Gallagher

Get the latest Gallagher news, updates, and event information delivered straight to your inbox.