Z10 Tension Sensor
Measures the mechanical disturbance of a tensioned fence wire, to raise an alarm when it is deflecte…
A single energizer platform that does everything from simple, single fence zone protection to complex multi-controller, multi-technology, fully networked solutions.
Available in two variants, Gallagher's F Series Fence Controllers are the next generation in high-performance control for the Gallagher monitored pulse fence system.
F Series Fence Controllers deliver maximum intruder deterrent, superior detection capabilities and exceed global safety standards.
F Series Fence Controllers are available in two variants: F31 and F32.
Note: Some features are only available in networked mode.
F Series Fence Controllers can be deployed as either stand-alone (no need for a network connection) or with Command Centre (v7.40 or later) as a fully integrated networked fence controller with full capabilities. F Series Fence Controllers are delivered in their stand-alone configuration and can easily be configured as networked fence controllers via a simple on-board switch.
The stand-alone configuration is designed to integrate with a customer’s existing alarm panel using simple I/O connections. This allows the fence to be integrated with the site's alarm panel, allowing arming, disarming, and alarm management. Configuration of the device is via internal switches, control is via input signals, and monitoring is via alarms (visible on the cover display) and relay output signals to an alarm panel or other indicator devices. Stand-alone systems may consist of an individual fence controller or multiple fence controllers which are synchronized.
F Series Fence Controllers can be connected via HBUS to Command Centre, where alarm monitoring, hardware/software configuration and data reporting can all be undertaken. F Series Fence Controllers use Gallagher’s HBUS protocol for secure communication to a Controller 6000 which communicates to the server/workstation (Command Centre) via a TCP/IP network.
Networked functionality requires Command Centre v7.40 or later.